Products
Home Page » 971-01

971-01



100-69

1220-5

1280-5-1

1281-5-1

171-131610

171-141621

173-141610

175-141621

176-141621

179-171629

1911-5

1931-5

195-171110

195-171521

195-671110

205-370

2111-5

2112-5

2171-5

2211-5

271-140342-01

271-140342-01

272-740642-01

273-140342-01

274-140342-01

275-742642-01

281-140342-03

506-3

512-212-01

523i-411

524i-847

525i-847

527i-847

532-211

540-100-01

550-12-23

550-12-24

550-5-5-2

550-8-3

550-867

581-141

581-321

610-01

630-01

650-10 OP7000

667-180332

669-180312

697-24155

739-23-1

743-221-01

745-35 S

806N-121100-01

827-260122-M

838-270522

841-100-01/-500-01

867-490322-M

868-490322-M

869-280322-M

887-160142

888-460522-M

906 CLASSIC

906-TUP-BRI

906-TUP-Quadri

911-210-6055

967-100382-100

969-190382

971-01

H867-190362

H867-190362-70

H867-290362-70

H868-290361

Two-thread chainstitch rotary sewing unit

The 971-01 is a rotary sewing unit for runstitching and subsequent trimming of cuffs of shirts
and blouses. The cut cuff parts are fed by the operator, runstitched and then trimmed and stacked.
In the meantime the operator can continuously feed the sewing unit with further material.
 
The rotary sewing unit consists of four stations.
The cuffs in the material clamps are processed in fully overlapped
working method and pass the following sewing areas:
 
Station 1 – material feed:
At the deposit table the cuffs are placed in the material  clamps
by the operator. The cuff parts are completely prepared.  The material
clamps open and close automatically. Intermediate lifting for
correction is possible by actuating the foot pedal.
 
Station 2 – runstitching the parts:
The sewing head follows the control cam and sews
 precisely along the contour of the material clamp.
 
Station 3 – trimming the seam allowances:
The trimming head also follows the control cam and trims the seam
allowances of the cuffs precisely. Furthermore, the thread
chain is cut at the seam beginning and the seam end.
 
Station 4 – stacking of parts:
The material clamps open automatically. The gripping arm of the stacker
pulls the finished cuffs out of the material clamps into the stacker.